ATEX approved pumps

Radial piston pumps with fixed displacement range of R

Deplacement 0,126 to 64,18 cm3/rev.. Radial piston pumps with fixed displacement has general application in hydraulic systems with performance up to 30 kW. Besides being able to be delivered as single pumps, they can also be supplemented with bellhousing and coupling and equipment for installation on or in the tank. Special versions where the oil is distributed to more outlets are available on request. ATEX approved

ATEX approved
Wide range of capacities at different pressures
Pressure range up to 700 bar
Rotation speed 100 - 2000 rpm. / Min. continuous
indipendent of the direction of rotation
BSP connections
Available in special editions with several P-ports on the same pump

Datasheet, pricelist

ATEX Variable axial piston pump, series of PVM

Variable displacement axial piston pumps for open circuit. A wide range of controls allows the pump can be adapted to many applications. The pumps have high efficiency, which means that the need for cooling is reduced.

Max pressure 320 bar
Maximum working pressure 280 bar
Displacement from 18 to 141 cm3/rev.
Low noise level and only 4% pressure pulsations
Compact, space-saving pumps
Standard with a maximum stroke limit
Powerful bearings - long life
Press Measuring point on the P-port
Supplied with alternative pressure / flow control
Suction port: SAE 3000 PSI and Pressure port: SAE 6000 PSI
ATEX certified

Datasheet, pricelist

Atex variable axial piston pump series V30E

V30E is a new generation of variable displacement axial piston pumps from Hawe-InLine.

Max pressure 420 bar
Continuous pressure 350 bar
Displacement 98-270 cm3/rev.
Compact design and light weight
Very fast response time
Quiet
Comes with alternate pressure / flow control
SAE 3000 PSI suction and SAE 6000 PSI pressure ports
Atex certified by Servi Group

Datasheet, pricelist

Atex variable aksialstempelpumper serie K3VL 140 - 200 cm3/omdr.

Pumps of Swash-plate type for open circuit, and parts and gasket sets.

Max pressure 350 bar
Continuous pressure 320 bar
Max displacement adjustment as standard
Wide range of regulators
Controller for parallel execution of multiple pumps
Atex certified by Servi Group

Datasheet, pricelist

ATEX DYNEX highpressure pumps for low viscosity fluid

High quality fixed desplacement checkball type piston pump. Extremely applicable for low viscosity fluid.

Also available in stainless steel.
Series PF1300 and PF4300
Max operating pressure 1040 bar
Specially designed for offshore and subsea applications.
Displacement 0,79 to19,33 cm3/rev.
Max speed 1.800 rpm.

Datasheet, pricelist

Atex variable aksialstempelpumper serie K3VL45 - 60 - 80 cm3/omdr.

Pumps of Swash-plate type for open circuit, and parts and gasket sets.

Max pressure 350 bar
Continuous pressure 320 bar
Max displacement adjustment as standard
Wide range of regulators
Controller for parallel execution of multiple pumps
Atex certified by Servi Group

Datasheet, pricelist

Atex tannhjulspumper for lavviskose væsker - innerfortannet serie QXV

Specially designed for low viscosities and aggressive liquids. The unique design allows the liquid down to 1 cSt to be pumped because the pressure is built up incrementally as needed and therefore compensates leakage due to viscosity. The uniqueness of Truninger special pumps, are an extremely low noise level compared to other types of pumps for liquids of low viscosity.

Pumps liquid down to 1 cSt.
Press building approx. 25 to 50 per element at 1-2 cSt.
Max ca. 250 bar at approx. 1.5 to 2.0 cSt.
Volumetric efficiency of approx. 65-70%
Can pump diesel, gasoline, jet fuel, naphtha, "sub sea oil" etc.
Atex certified by Servi Group

Datasheet, pricelist

Atex tannhjulspumper - innerfortannet serie QX

The pumps are supplied with 2 - or 4-hole metric flange and straight shaft with a wedge. Also available as double and triple pump.

Extremely low-noise pumps
High efficiency
Long life
Very good suction characteristics
Available for pumping chemicals
Atex certified by Servi Group

Datasheet, pricelist

SERVI GROUP
Rasmus Solbergs vei 1
Postboks 3230
1400 Ski

T +47 64 97 97 97
F +47 64 97 98 99
post@servi.no

24/7 Service
T +47 64 97 97 00

Servi AS

Bergen	T +47 55 10 82 20
CCB-Ågotnes	T +47 934 56 607
Kongsberg	T +47 48 06 56 56
Kristiansand	T +47 38 10 22 90
Rissa	T +47 73 85 05 00
Ski	T +47 64 97 97 97
Trondheim	T +47 73 80 10 00

Servi Ulsteinvik AS
Ulsteinvik	T +47 70 31 85 50
Ålesund	T +47 96 91 96 01

Servi Hydraulik AB
Gøteborg	T +46 (0)31 745 00 62