Testing of cement and mortar / Prøving av sement og mørtler

Testing of cement according to EN 196 and mortars according to DIN EN 1015

Automatic shaker table for determination of consistency according to DIN EN 1015-3, BS EN 413-2 EN 459-2

• Electric operation with counter
• Comes complete with stainless steel Ø300mm, cone Ø70/100xh60mm funnel and tubs
• Electrical connection 1-phase 230V, 50Hz
• Weight 60 kg

Testing of cement and mortar according to NS EN 196 and NS EN 1015

Manual flow table for testing of flow and workability at cement and mortar

• Hand-operated
• Complete with stainless steel plate Ø300 mm, cone Ø70/100xh60mm funnel and tamper

Testing of cement and mortar according to NS EN 196 and NS EN 1015

Prism moulds 40.1 x 40, 0 x 160 mm acc. EN 196, DIN 52 450, ISO 679, ASTM C348

• Side and end plates are marked
• The surfaces are grounded
• Drilling for shrinkage measurement drain type 1
• Weight 10.25 kg

Testing of cement and mortar according to NS EN 196 and ISO 679

The machine comprises a table which is rigidly connected by two arms with an axle 800 mm away from the middle of the table and placed on a rotating cam plate with a revolving rate of 60 revs./min. Projection and strokes correspond to a pyramid hardness of at least 500 HV. The entire mass of the table incl. the arms, an empty triple form, top box and clips is 20 kg +/- 0,5 The appliance is supplied with power connection, automatic counter, start and stop key and automatic switch-off when the test ends.

Testing of cement and mortar according to NS EN 196-1

Vibration table for compacting cement mortar

• for 1 triple form, with clamping device
• with device for adjusting and indicating width of vibration (0,4 - 1,0 mm) as well as time switch (0-300 sec.)
• with stainless steel table top
• table top 400 x 300 mm
• vibrations (through magnet vibrator) 3000 revs./min
• weight approx. 105 kg

Testing of mortar for masonry

Air pores measure, 1 ltr. for determination of air content in fresh mortar acc. EN 1015-7 and building scale according to EN 459-2

• Sample volume 1 litre
• Weight 6 kg