Gerotor/Geroler motors

Gerotor H series motors

Char-Lynn motor is of the gerotor type, combines high performance with low initial cost. Motors are stocked with SAE-A 2-bolt flange, G 1/2 "connections and 25mm axle.

• Deplacement 36-370
• Torque up to 520 Nm
• Speed ??up to 1100 revs. / Min.
• Maximum inlet pressure 175 bar
• Allowed return pressure without drain 105 bar
• Recommended purity ISO 18/13
• Optimum viscosity 24-43 cSt
• Valves flanges can be supplied
• Corrosion protected shaft is supplied from stock on some models

Gerola motors series S

Char-Lynn motor that is gerolertype combines high performance with low acquisition costs. Motors are stocked with SAE-A 2-bolt flange, G 1/2 "connections and 25mm axle.

• Deplacement 59-370 cm3/rev.
• Torque up to 515 Nm
• Speed ??up to 1150 revs. / Min.
• Maximum inlet pressure 175 bar
• Allowed return pressure without drain 105 bar
• Recommended purity ISO 18/13
• Optimum viscosity 24-43 cSt
• Valves flanges can be supplied

Gerolermotorer series J2

Char-Lynn gerolermotor J2 Series combines small dimensions with high performance. motor is the smallest in the Eaton's series of gerolermotorer have high starting torque and the same torque regardless of the direction of rotation.

• Displacement Volume from 8.2 to 19.8 cm3/rev.
• Torque up to 61 Nm
• Speed ??up to 2535 revs. / Min.
• Maximum inlet pressure 200 bar
• Allowed return pressure without drain 70 bar
• Recommended purity ISO 18/13
• Optimum viscosity 24-43 cSt
• 2-bolt montasjeflens
• Standard shaft diameter dimension of 16mm
• Spline shaft on request

Gerolermotorer series T

Char-Lynn motor is gerolertype, is a compact motor at the same time the performance is higher than other similar motors Motors are stocked with SAE-A 2-bolt flange, G 1/2 "connections and 25mm axle.

• Deplacement 36-370 cm3/rev.
• Torque up to 510 Nm
• Speed ??up to 1155 revs. / Min.
• Maximum inlet pressure 175 bar
• Allowed return pressure without drain 105 bar
• Recommended purity ISO 18/13
• Optimum viscosity 24-43 cSt
• Valves flanges can be supplied
• Corrosion protected shaft is supplied from stock on some models

Gerolermotorer Series 4000 Compact

Char-Lynn high torque low speed motors in the "compact" version. Same description as provided satndard 4000 but with size as a 2000 engine

• Deplacement 160-490 cm3/rev.
• Allowed return pressure without drain 140 bar
• Recommended purity ISO 18/13
• Optimum viscosity 24-43 cSt
• Two speed motors available
• Valves flanges are available

Gerolermotorer Series 4000

Reliable low speed high torque Char-Lynn motors, disc valve type. Motors are stocked with SAE-C 4-bolt flange, G 3/4 "connections and 40mm axle. Also available as a wheel motor that manages high side loads and without bearings for direct mounting on gear

• Fortrengningsvolum 110 - 625 cm3/omdr.
• Vrimoment opp til 1800 Nm
• Turtall opp til 860 omdr./min.
• Maks innløpstrykk 310 bar
• Tillatt returtrykk uten drenering 105 bar
• Anbefalt renhetsgrad ISO 18/13
• Optimal viskositetsområde 24-43 cSt
• Ventiler for flensmontasje er tilgjengelig

Gerolermotorer Series 6000

Reliable low speed high torque Char-Lynn motors, disc valve type. Motors are stocked with SAE CC 4-bolt flange, G 1 "connections and 40mm axle. Also available as a wheel motor that manages high side loads and without bearings for direct mounting on gear

• Deplacement 195-985 cm3/rev.
• Torque up to 1885 Nm
• Speed ??up to 860 revs. / Min.
• Maximum inlet pressure 310 bar
• Allowed return pressure without drain 105 bar
• Recommended purity ISO 18/13
• Optimum viscosity 24-43 cSt

Gerolermotorer Series 10000

Reliable low speed high torque Char-Lynn motors, disc valve type. Motors are stocked with SAE CC 4-bolt flange, SAE 1 1/4 "connections and 2 1/4" tapered shaft, SAE J501 Also available as a wheel motor that manages high side loads and without bearings for direct mounting on gear

• Deplacement 345-940 cm3/rev.
• Vrioment up to 2700 Nm
• Speed ??up to 780 revs. / Min.
• Maximum inlet pressure 275 bar
• Allowed return pressure without drain 20 bar
• Recommended purity ISO 18/13
• Optimum viscosity 24-43 cSt
• Two speed motors available
• Valves flanges available

Gerolermotorer series T with built-in brake

• Deplacement 36-370 cm3/rev.
• Torque up to 510 Nm
• Speed ??up to 1155 revs. / Min.
• Maximum inlet pressure 155 bar
• Recommended purity ISO 18/13
• Integrated brake in the rear with a 6:1 exchange as a result of gerolerdesign
• Brake Torque 2000 to 5000 Nm depending on size and design

Gerolermotorer Series 2000

Reliable low speed high torque Char-Lynn motors, disc valve type. Motors are stocked with 4-bolt flange, G 1/2 "connections and 32mm axle. Also available as a wheel motor that manages high side loads and without bearings for direct mounting on gear

• Deplacement 80-490 cm3/rev.
• Torque up to 900 Nm
• Speed ??up to 920 revs. / Min.
• Maximum inlet pressure 310 bar
• Allowed return pressure without drain 140 bar
• Recommended purity ISO 18/13
• Optimum viscosity 24-43 cSt
• Two speed motors available
• Valves flanges are available